The Contour Back-to-Wall Bath is a freestanding form drawn to sit against the wall: a flat back edge, a continuous curved front and rounded ends, the front rising from a rounded base to a flat 25mm rim. At 1700mm long and 800mm wide, it suits bathrooms that want the curved front of a freestanding bath without the clearance behind it that a fully freestanding bath needs.

Inside, the walls slope to a 450mm depth, with the overflow set at 376mm, so the back and shoulders are supported in a reclined position at either end. The flat back meets the wall along its full length, so nothing is lost to a gap behind the bath.

The shell is Acryl IV, Cavari's thermally formed acrylic backed by four layers of fibreglass and resin where most acrylic baths use two, 6–9mm through the wall. The reinforcement is what gives the Contour its weight, 45kg empty, and a shell that sits solidly in place, with no give at the rim or base under load. It stands on a concealed one-piece metal frame with soft rubber feet, rather than the hard plastic most baths use, so they do not harden with age. A white click-clack waste, colour-matched to the bath, sits centred in the base, with a plain overflow in the same colour; the waste is also offered in every Cavari brassware finish, so it can be matched to the taps and filler in the room. Every Contour is CE certified and carries a fifteen-year guarantee.

Finished in Glossy White, a reflective surface that wraps the curved front and carries the light of the room around the rounded ends where the bath turns to meet the wall.